Logo
<< Previous ProductNext Product >>
Back to: Offset
LNB_GTDLNB1T_54f02c7472081.jpgLNB_GTDLNB1T_54f02c7472081.jpg

LNB GTDLNB1T

Manufacturer: GT SAT PDFPrintEmail
Programmable Digital SCR LNB

Programmable DIGITAL SCR LNB

  • up to 24 User Bands
  • fully programmable configuration (number, bandwidth, center frequency, signal level, etc.) with XDiSEqC protocol
  • static mode of working (equivalent to SMATV head-end station)
  • dynamic mode of working (equivalent to SCR LNB)
  • User Band center frequency accuracy – 0.125 MHz
  • User Band bandwidth up to 82 MHz
  • coax cable loss compensation by signal level regulation
  • terrestrial input (47 – 700MHz)
  • software upgrade over coax cable
  • software version read-out
  • serial number programming
  • wide-band RF architecture (lower spurious, lower power consumption)
  • DiSEqC 2.0 communication
  • compatible with EN50494, EN50607 and dHello
  • compact housing

Technical specification

  • Input frequency: 10700 – 12750MHz
  • Output frequency: 950 – 2150MHz
  • UB frequencies: programmable with 0.125MHz accuracy
  • LO stability: ± 1MHz at room temperature and ± 3MHz at temperature -35 to +65°C
  • Noise Figure: < 0.8dB (max.)
  • Gain: 42 – 62dB (programmable with 1dB step)
  • Gain Flatness: ±0.2dB for 26MHz BW
  • Gain variation: 1dB over temp. (by programming)
  • Cross polarization isolation: > 23dB
  • Image rejection: > 40dB
  • Linear polarization: vertical and horizontal
  • Local oscillator: 10.40GHz
  • Integrated phase noise: < 2.5° RMS @ 10kHz – 13MHz
  • Power consumption: 4.75W (max. with all UBs active)
  • Power supply voltage: 10 – 20V
  • Operating temperature range: -30 to +65°C
  • Feed length: 42mm

Mallouppas & Papacostas Satellite Ltd. All rights reserved.